Start Over Date 1945

1. A study in choreography for camera (02:37)

Date:
1945
Summary:
In this film the cinematographic space becomes itself an active element of the dance rather than being an area in which the dance takes place. The dancer shares with the camera and the cutting a co...

2. Action at Angaur (28:20)

Date:
1945
Summary:
Documents the invasion and capture of Angaur Island (Palau group) by the 81st ("Wildcat") Infantry Division in its first battle. In July 1944 the troops relax at Honolulu. Shows activities aboard a...

3. Army air forces : Pacific (16:49)

Date:
1945
Summary:
Reports Gen. H.H. Arnold's plea for a strong post-war Air Force; explains that war time supremacy was the result of aviation, naval and ground force power; and includes scenes of the air war over W...

4. Bill Bailey and the four pillars (18:07)

Date:
1945
Summary:
A story of land economy and one man, Bill Bailey of Clarksville, Tennessee, through whose foresight and untiring effort the Four Pillars of Income were established in Montgomery County, Tennessee (...

6. Blind riveting (15:22)

Date:
1945
Summary:
Shows the necessity for blind riveting, how to rivet parts that are completely blind, and how to use the special tools and rivets in blind riveting jobs.

7. Boring holes with offset boring head (27:13)

Date:
1945
Summary:
Shows how to mount the workpiece on the milling machine table; how to use a wiggler to position the workpiece for drilling; how to mount the cutting tools in the spindle; how to bore the hole to cl...

9. Cutting a short rack (17:44)

Date:
1945
Summary:
Shows how to set up the machine; how to set up and align the workpiece on the machine table; how to position the table and the workpiece in relation to the utter; and how to rough- and finish-mill ...

10. Cutting with carbide tools part 1 : single point (19:25)

Date:
1945
Summary:
Shows how to select the tool for the job; how to set up the job; how to calculate speed, feed, and depth of cut; how to machine on a lathe, using a single-point carbide tool; and how to correct uns...

11. Despotism (10:39)

Date:
1945
Summary:
Provides an analysis of the meaning of despotism, showing that any community can be rated along a scale from complete democracy to complete despotism. Analyzes two sings which characterize despotis...

12. Ed Feil L'orient (15:59)

Date:
1944 to 1945
Summary:
Home movie filmed in Lorient, France, 1945. Depicts Ed Feil's military life, including soldiers in a dugout, loading mortars, riding in a military jeep, and eating at camp. Also shows men on pass t...

13. Forge welding (11:41)

Date:
1945
Summary:
Shows how to maintain a clean, deep, hot fire; how to heat mild steel for forging; how to upset and scarf round stock; how to make a lap weld; and how to shape and hammer-refine the weld.

15. Grinding a V-block (21:16)

Date:
1945
Summary:
Shows how to set up a V-block to grind the ends and the V; how to rough- and finish-grind the ends; how to establish reference points for grinding the V to precision dimensions; and how to check th...

16. Grinding multiple-point carbide tools (19:54)

Date:
1945
Summary:
Shows how to remove blades from inserted-blade type cutter; how to off-hand grind individual teeth; how to reassemble and align cutter blades; how to circle grind; how to surface grind all tooth-re...

17. Grinding single-point carbide tools (25:42)

Date:
1945
Summary:
Shows how to prepare the wheel for grinding; how to semi-finish and finish-grind a dull tool; how to rough-grind a chipped or broken tip; how to grind a newly brazed tool; and how to grind a chip b...

19. Housing in Scotland (14:52)

Date:
1945
Summary:
Shows examples of permanent and temporary houses planned by the Scottish Housing Advisory Committee and based on opinions of service men and women, and factory workers during World War II.

20. Installing Conduit (24:28)

Date:
1945
Summary:
Shows how to plan the job; how to bend electrical metallic tubing; how to install the metallic tubing runs; how to bend rigid conduit; how to install rigid conduit runs; and how to use flexible con...

21. Installing surface metal raceway (21:15)

Date:
1945
Summary:
Shows how to plan the job; how to use molding raceway fittings; how to install a molding raceway run to a ceiling outlet; how to install a run from a ceiling outlet to a wall switch; how to install...

22. Instructing the disabled worker on the job (13:47)

Date:
1945
Summary:
Presents dramatized instances of good and poor instruction of disabled workers. Also shows how a one-armed worker successfully learns to operate a drill press after proper instruction.

23. Into battle (35:45)

Date:
1945
Summary:
An American soldier, during his combat career, realizes the greatness of his country and determines to assume his share of the responsibilities of good citizenship upon his return to civilian life.

24. Keeping Your Car Fit (11:18)

Date:
1945
Summary:
Explains why a weekly checkup on tires, battery, engine oil, and radiator is necessary; why tires should be crisscrossed; why a car should be lubricated regularly and the engine oil and gear lubric...

25. Kitchen come true (18:04)

Date:
1945
Summary:
Shows a Canadian farm family working together planning how to modernize their kitchen with new appliances and step-saving arrangements. Pictures the kitchen before and after their work on it.

27. Matt Mann's swimming techniques for girls (10:44)

Date:
1945
Summary:
Matt Mann applies his teaching principles with a group of girls. The crawl, breast stroke, back stroke, and butterfly stroke are demonstrated in both regular and slow motion photography.

28. Mermaid's paradise (09:56)

Date:
1945
Summary:
A study of aqua-sports using underwater photography. Including swimming, synchronized diving,

29. Molding a horizontal cored part (21:54)

Date:
1945
Summary:
Use of a horizontal core, a split pattern, chaplets, and chaplet supports; how to gate a mold for rapid pouring of a thin casting; and how to clean a casting.

30. Molding with a loose pattern (floor) (24:04)

Date:
1945
Summary:
Shows the difference between bench and floor molding, how to face a deep pattern, ram a drag and walk it off, clamp a mold, locate sprues and risers, and tuck the crossbars of a large cope.

31. Molding with a three part flask (34:59)

Date:
1945
Summary:
Shows how to use a deep follow board; the technique of facing, ramming, and venting a deep green sand core; how to use a cheek in a three-part flask; and the purpose and method of step-gating.

33. Now the peace (21:06)

Date:
1945
Summary:
Presents a factual summary of the basic United Nations Organization program for world security in 1945. Clarifies the structure, analyzes the plans, and shows how, by joint action to solve relief,...

34. On to Tokyo (10:12)

Date:
1945
Summary:
Combat footage in Europe and the Battle of Leyte Gulf during World War II.

36. Power bending conduit (17:10)

Date:
1945
Summary:
Shows how to assemble and operate a floor bender; how to assemble and operate a portable bender; how to make a 45-degree bend in a 3-inch conduit; how to make an offset in 1 1/2-inch conduit; and h...

37. Precision Gage Blocks (18:35)

Date:
1945
Summary:
Shows how to calculate a stack of gage blocks; how to clean and assemble blocks; the various uses of gage blocks in setting inspection gages; and how to store gage blocks when not in use.

40. Principles of Gas-Filled Tubes (15:00)

Date:
1945
Summary:
Explains the theory of ionization applied to gas-filled tubes; the control of current in circuits employing gas-filled tubes; the use of the gas diode as a rectifier; the action of the grid in a ga...

41. Principles of Gearing : An Introduction (18:45)

Date:
1945
Summary:
Explains and differentiates between friction gears and toothed gears, the law of gearing, positive driving, involute profiles, pressure angle, cycloid profiles, velocity rates, and circular pitch.

42. Remember These Faces (17:54)

Date:
1945
Summary:
World War II film showing the horror of the Pacific war with extensive coverage of the care and treatment of the wounded. Created in support of the 7th War Loan drive, the film encourages the gener...

43. Repulsion induction motor general overhaul (24:52)

Date:
1945
Summary:
Shows how to check a repulsion-induction motor for electrical and mechanical faults; how to dismantle a repulsion-induction motor; how to clean and plug the commutator; how to turn the commutator; ...

44. Ripping and crosscutting (18:09)

Date:
1945
Summary:
Shows how each working part of the variety saw functions; how to check saw blades; how to set the fence; how to protect one's self on the job; how to change saw blades; how to use a cutoff gage; an...

45. Roughing-in non-metallic sheathed cable (24:02)

Date:
1945
Summary:
Shows how to plan the installation of the circuit run, switch run, and wall receptacle run; how to determine the location of required runs; how to install an offset bar hanger and ceiling outlet bo...

46. Sawing a reverse curve and a bevel reverse curve (17:25)

Date:
1945
Summary:
Shows how to select and lay out stock to avoid waste; how to reverse curves to contour lines; how to use the table tilting gage; how to saw a bevel reverse curve; how to prepare a template for a ne...

47. Setting up and machining bar stock (34:09)

Date:
1945
Summary:
Shows how to set up the turret lathe for the production machining of bushings from bar stock; how to install the collet; how to set up the hexagon turret; and how to set up the cross slide.

48. Setup for face milling with a fixture (20:09)

Date:
1945
Summary:
Shows how the horizontal boring, drilling, and milling machine operates; how to install the fixture; how to set up the workpiece; and how to select and install an end mill and a face mill.

49. Sharpening and tempering farm tools (16:07)

Date:
1945
Summary:
Shows how to heat carbon-steel tools for forge sharpening; how to sharpen, harden, and temper a plowshare; how to sharpen, harden, and temper a cultivator shovel; and how to identify tempering colors.

50. Single ram vertical surface broaching (28:47)

Date:
1945
Summary:
Shows the parts of a single ram vertical machine; how to interpret the blueprint of a broaching tool; how to install broaching inserts for straddle broaching; how to mount the toolholder with its a...