Start Over Date 1945 Collection IUL Moving Image Archive Unit IUL Moving Image Archive

1. Bill Bailey and the four pillars (18:07)

Date:
1945
Summary:
A story of land economy and one man, Bill Bailey of Clarksville, Tennessee, through whose foresight and untiring effort the Four Pillars of Income were established in Montgomery County, Tennessee (adapted from the Reader's Digest story of the same name by J. P. McEvoy).

2. Cutting with carbide tools part 1 : single point (19:25)

Date:
1945
Summary:
Shows how to select the tool for the job; how to set up the job; how to calculate speed, feed, and depth of cut; how to machine on a lathe, using a single-point carbide tool; and how to correct unsatisfactory machining.

3. Grinding a V-block (21:16)

Date:
1945
Summary:
Shows how to set up a V-block to grind the ends and the V; how to rough- and finish-grind the ends; how to establish reference points for grinding the V to precision dimensions; and how to check the work for accuracy.

4. Grinding multiple-point carbide tools (19:54)

Date:
1945
Summary:
Shows how to remove blades from inserted-blade type cutter; how to off-hand grind individual teeth; how to reassemble and align cutter blades; how to circle grind; how to surface grind all tooth-relief angles; how to finish surfaces and edges by honing; and how to inspect resharpened cutters.

5. Grinding single-point carbide tools (25:42)

Date:
1945
Summary:
Shows how to prepare the wheel for grinding; how to semi-finish and finish-grind a dull tool; how to rough-grind a chipped or broken tip; how to grind a newly brazed tool; and how to grind a chip breaker.

6. Housing in Scotland (14:52)

Date:
1945
Summary:
Shows examples of permanent and temporary houses planned by the Scottish Housing Advisory Committee and based on opinions of service men and women, and factory workers during World War II.

7. Installing Conduit (24:28)

Date:
1945
Summary:
Shows how to plan the job; how to bend electrical metallic tubing; how to install the metallic tubing runs; how to bend rigid conduit; how to install rigid conduit runs; and how to use flexible conduit.

8. Installing surface metal raceway (21:15)

Date:
1945
Summary:
Shows how to plan the job; how to use molding raceway fittings; how to install a molding raceway run to a ceiling outlet; how to install a run from a ceiling outlet to a wall switch; how to install a run from a ceiling outlet to a wall fan; and how to install a run to a floor outlet.

9. Into battle (35:45)

Date:
1945
Summary:
An American soldier, during his combat career, realizes the greatness of his country and determines to assume his share of the responsibilities of good citizenship upon his return to civilian life.

10. Keeping Your Car Fit (11:18)

Date:
1945
Summary:
Explains why a weekly checkup on tires, battery, engine oil, and radiator is necessary; why tires should be crisscrossed; why a car should be lubricated regularly and the engine oil and gear lubricants changed; why the oil filter elements should be replaced regularly; and why the cooling system should be inspected periodically.

12. Mermaid's paradise (09:56)

Date:
1945
Summary:
A study of aqua-sports using underwater photography. Including swimming, synchronized diving,

13. Molding a horizontal cored part (21:54)

Date:
1945
Summary:
Use of a horizontal core, a split pattern, chaplets, and chaplet supports; how to gate a mold for rapid pouring of a thin casting; and how to clean a casting.

14. Molding with a loose pattern (floor) (24:04)

Date:
1945
Summary:
Shows the difference between bench and floor molding, how to face a deep pattern, ram a drag and walk it off, clamp a mold, locate sprues and risers, and tuck the crossbars of a large cope.

15. Molding with a three part flask (34:59)

Date:
1945
Summary:
Shows how to use a deep follow board; the technique of facing, ramming, and venting a deep green sand core; how to use a cheek in a three-part flask; and the purpose and method of step-gating.

17. On to Tokyo (10:12)

Date:
1945
Summary:
Combat footage in Europe and the Battle of Leyte Gulf during World War II.

19. Remember These Faces (17:54)

Date:
1945
Summary:
World War II film showing the horror of the Pacific war with extensive coverage of the care and treatment of the wounded. Created in support of the 7th War Loan drive, the film encourages the general public to purchase war bonds to aid the recovery of wounded servicemen.

20. Repulsion induction motor general overhaul (24:52)

Date:
1945
Summary:
Shows how to check a repulsion-induction motor for electrical and mechanical faults; how to dismantle a repulsion-induction motor; how to clean and plug the commutator; how to turn the commutator; how to remove a damaged sleeve bearing; how to ream to size and install a new sleeve bearing; how to remove a damaged coil and wind and insulate a new coil; and how to assemble and lubricate a repulsion-induction motor.