Start Over Date 1945 Collection IUL Moving Image Archive Unit IUL Moving Image Archive

1. Bill Bailey and the four pillars (18:07)

Date:
1945
Summary:
A story of land economy and one man, Bill Bailey of Clarksville, Tennessee, through whose foresight and untiring effort the Four Pillars of Income were established in Montgomery County, Tennessee (...

2. Boundary lines (11:11)

Date:
1945
Main contributors:
Phillip Stapp; Tony Kraler; Nathan Sobel
Summary:
By means of animated lines, figures, and scenes, film illustrates through everyday happenings how "a line may be many things" and "a line is only an idea." Makes a plea for tolerance and a breaking...

3. Cutting with carbide tools part 1 : single point (19:25)

Date:
1945
Summary:
Shows how to select the tool for the job; how to set up the job; how to calculate speed, feed, and depth of cut; how to machine on a lathe, using a single-point carbide tool; and how to correct uns...

4. Forests Forever (24:19)

Date:
1945
Main contributors:
United States. Department of Agriculture. Forest Service
Summary:
Shows the necessity for U.S. Federal regulation of the nation's timber to insure protection and perpetuation of this vital resource. Shows that poor management practices for quick exploitation of p...

5. Gage blocks and accessories (22:05)

Date:
1945
Main contributors:
Division of Visual Aids, U.S. Office of Education (Producer); Federal Security Agency (Producer); Ray-Bell Films, Inc. (Producer)
Summary:
Explains why accessories are used with gage blocks; shows how to inspect a plug gage, an adjustable snap gage, a profile gage, a ring gage, and a screwthread pitch; and shows how to build a height ...

6. Grinding a V-block (21:16)

Date:
1945
Summary:
Shows how to set up a V-block to grind the ends and the V; how to rough- and finish-grind the ends; how to establish reference points for grinding the V to precision dimensions; and how to check th...

7. Grinding multiple-point carbide tools (19:54)

Date:
1945
Summary:
Shows how to remove blades from inserted-blade type cutter; how to off-hand grind individual teeth; how to reassemble and align cutter blades; how to circle grind; how to surface grind all tooth-re...

8. Grinding single-point carbide tools (25:42)

Date:
1945
Summary:
Shows how to prepare the wheel for grinding; how to semi-finish and finish-grind a dull tool; how to rough-grind a chipped or broken tip; how to grind a newly brazed tool; and how to grind a chip b...

9. Grow Your Own (15:54)

Date:
1945
Main contributors:
United States. Department of Agriculture
Summary:
Provides basic instructions for planting a home vegetable garden. "Sets forth, in light vein, the essentials of good gardening; selection of the site, preparation of the soil, how to lay out a gard...