Could not complete log in. Possible causes and solutions are:
Cookies are not set, which might happen if you've never visited this website before.
Please open https://media.dlib.indiana.edu/ in a new window, then come back and refresh this page.
An ad blocker is preventing successful login.
Please disable ad blockers for this site then refresh this page.
Shows how to select and lay out stock to avoid waste; how to reverse curves to contour lines; how to use the table tilting gage; how to saw a bevel reverse curve; how to prepare a template for a newel post; and how to saw a newel post having reverse curves.
Shows how to set up the turret lathe for the production machining of bushings from bar stock; how to install the collet; how to set up the hexagon turret; and how to set up the cross slide.
Shows how the horizontal boring, drilling, and milling machine operates; how to install the fixture; how to set up the workpiece; and how to select and install an end mill and a face mill.
Shows how to heat carbon-steel tools for forge sharpening; how to sharpen, harden, and temper a plowshare; how to sharpen, harden, and temper a cultivator shovel; and how to identify tempering colors.
Shows the parts of a single ram vertical machine; how to interpret the blueprint of a broaching tool; how to install broaching inserts for straddle broaching; how to mount the toolholder with its assembled broaching tool; how to mount and adjust the work fixture; and how to surface-broach at production rate.
Shows how to solder a lug, using electric soldering tongs; how to solder a lug, using a blowtorch; how to solder a lug, using a solder pot and ladle; how to splice stranded conductors, using a split solder sleeve; and how to make a served cable splice.
Shows how to select correct rivet sets for stationary and portable squeezers and how to set up and use the stationary squeezer and the portable squeezer.
Shows how to check for play in the steering wheel; how to check the front end assembly for excessive play; how to make a rough test for wheel balance; how to correct wheel runout; how to make a toe-in test; and how to test springs, axles, and over-all backlash.
Shows the physical therapist how to teach the bed patient reconditioning exercises; how to teach the patient to walk in a walker; how to teach the various methods of crutch walking--two point, four point, and swinging; how to teach the patient to sit, rise, and climb stairs; and the safety factors involved in crutch walking.
Shows how to determine the amount of clutch pedal clearance or "lash"; how to correct abnormal clutch pedal lash; how to check the condition of the pull-back spring; how to check the clutch for slipping, grabbing, or drag; and how to inspect and adjust the hand brake.